Flexible Process Mesh Belt Drying Tunnel /Tunnel Dryer

Description

This drying machine use of heat pump evaporator absorbs heat from the outside air.or recycling of exhaust gas residual heat in the process of drying.Through the work of compressor, the energy transport (transfer) to drying box, drying box of hot air after repeated cyclic heating,through the circulation fan blows, absorb the moisture in the material, its cooling humidification, through hot air platoon is wet or the process of condensation, water take the moisture out of the material, and finally realizes the continuous drying of materials.

Advantages

Stable and consistent outlet pressure dew point
·Reasonable simplified design ensures that the compressed air and desiccant contact time is 4.8 seconds to meet the dew point requirements of finished gas;
·30% of the remaining amount of desiccant, desiccant and compensation with the natural aging, to ensure that the drying effect;
·Large diffuser to ensure uniform air flow through the desiccant layer, eliminating channeling phenomenon.

Regeneration loss less than 12%
·Excellent barrel design, saving 95% of the heat absorbed, the stored heat is used to increase regeneration regeneration temperature of regeneration stage, improve the desorption capacity of the equipment, making the regeneration completely;
·Drying and regeneration using reverse convection, wet air flow through the best effect when the adsorbent;
·The amount of regeneration gas can be adjusted according to the operating load demand of the dryer.